Switch The Head Display To Be Viewed With The Right Eye - Brother AIRScouter WD-360B User Manual

3
Replace the head band cover as
shown, ensuring that the rear
band is fed through the cut-out on
the end of the cover. Press the
area highlighted in the illustration
and slide the cover back into
place.
4
Repeat Steps 1-3 to attach the other end of the rear band
to the other end of the head band.
5
Adjust the rear band's length using
the slider.
Switch the head display to be
viewed with the right eye
While the AiRScouter is supplied with the head display
screen on the left side of the head band, the flexible arm
may be switched to allow the head display to be positioned
over the right eye instead.
Note The flexible arm for left eye and the flexible
arm for right eye are two separate parts that
are included in the AiRScouter box. Because
of its design, the flexible arm for right eye
cannot be used for left-eyed viewing, and vice
versa.
21