2. Before using the
AiRScouter
How to assemble the AiRScouter
Ensure the AiRScouter is powered and connected correctly
according to the following procedure:
1
Insert the internal battery into the control box:
a) Remove the screw from
the back of the control
box and slide open the
cover panel.
b) Insert the Li-ion
rechargeable battery.
c) Replace the cover panel
and tighten the screw on the back of the control box.
2
Connect the AC adapter to the AC adapter port on the
control box, and fully charge the internal battery.
3
Open the belt pouch and slide the control box into it as
shown, so that the ports are still accessible when the flap
is closed.
11