This guide provides basic information about setting up and using the AiRScouter, as well as detailed tips for troubleshooting problems that may occur. User's Guide (available online at Brother Solutions Center) This guide provides additional information on settings, operation, troubleshooting, and maintenance. Visit the Brother Solutions Center at support.brother.com,...
LED Indications Control Box flashing a Display LED (Green) State Name Explanation The AiRScouter is receiving Display ON a compatible video signal from an external device. The control box is processing the (Slowly) Operating video signal. a Control Panel The AiRScouter is not receiving (Quickly) No input...
Before using the AiRScouter How to assemble the AiRScouter Note • If an input source with an unsupported resolution is connected, the Ensure the AiRScouter is powered and connected correctly according to image may not display correctly on the head display screen. If this the following procedure: occurs, check the output resolution of the video source.
Enlarge or reduce the size of the image Note Press the mode button • If the ball joints become loose after adjusting the position of the head to enlarge or reduce display, turn the dials on either end of the flexible arm clockwise to fix the head display in place.
Attach the rear band Rotate the dial on the ball joint between the flexible arm and the head band clockwise, until the flexible arm is separated from the head band. Press the area highlighted in the image below, and slide the head band cover towards the end of the band to remove it.
Power supply Attach the flexible arm to the head band by lining up the wide end of the flexible arm with the threads on the head band, and rotating the dial on the ball joint clockwise to tighten. Important • The AiRScouter can use the following power supplies: - The AC adapter supplied in the box - The internal battery supplied for use inside the control box...
If, after reading the troubleshooting tips, you are unable to resolve your battery. problem, visit the Brother Solutions Center at support.brother.com The internal Connect the AC adapter to the battery AiRScouter to charge.
In particular, usage at a high charge rate (90% or more) in a hot place greatly For FAQs, troubleshooting and more, visit the Brother Solutions Center accelerates the deterioration of the Li-ion rechargeable battery.