Using An External Battery - Brother AIRScouter WD-360B User Manual

Important
•
•
•

Using an External Battery

You can use a third-party USB battery as an external power
source to extend the operating time of the AiRScouter beyond
that supported by the internal battery.
Important
•
•
You cannot charge the AiRScouter by
connecting it to a computer with a USB cable.
If a USB-AC conversion adapter is used as
the external power supply for the AiRScouter,
ensure that the adapter supplies a voltage of
DC 5 V and a current of at least 1 A.
If the AiRScouter becomes hot to the touch
due to continuous use, or if the environmental
conditions are outside of the recommended
range, the external power LED will begin to
flash quickly. While the AiRScouter is in this
state, the internal battery cannot be charged.
Only use a third-party external battery that
can supply a voltage of DC 5 V and a current
of at least 1 A.
The external battery cannot be used to charge
the internal battery. The internal battery can
only be charged by the AC adapter while the
AiRScouter is powered off.
27