Brother AIRScouter WD-360B User Manual page 23

5
Turn the head band over so that the threads of the ball
joint face the other way, and the AiRScouter logos on the
head band covers are upside-down.
6
Remove the two head band covers as shown, by pressing
the area highlighted in the image below and sliding the
cover to the end of the head band. Swap the two covers
and replace them as shown, so that the AiRScouter logos
are now facing the correct direction.
7
Attach the flexible arm for right-eyed viewing (the other
arm that is included in the box) to the head display,
by lining up the narrow end of the flexible arm with the
threads on the head display and rotating the dial on the
ball joint clockwise to tighten.
23