Table of Contents
Advertisement
APPENDIX A - DIP SWITCH SETTINGS
There are two DIP switches on the main board. Figures A and B show the settings for each parameter controlled by a switch. Switches
are shown in the default settings.
Fig. A — SW1 Settings
© Carrier Corporation 2020
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No.20-40VMH001-01
Printed in U.S.A.
Form 40VMH-2SI
Pg 32
Fig. B —SW8 Settings
2-20
Replaces: 40VMH-1SI
Advertisement
Table of Contents
