Possible Misuse; Lithium­ion Battery Status Display; Items Supplied; Technical Data - Hilti NPR 032 IE-A22 Operating Instructions Manual

3.3

Possible misuse

• Do not use this hand-held product clamped in a fixed position or as a stationary device.
• This electro-hydraulic crimping tool may not be exposed to heavy rain or used under water.
3.4 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the product are indicated by the indicator of the
Li­ion battery. The state of charge of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED flashes.
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the LEDs of the charge state indicator flash, follow the instructions
in the 'Troubleshooting' section.
3.5

Items supplied

Crimping / pressing tool, operating instructions.
Other system products approved for use with this product can be found at your local HILTI STORE or online
at: www.hilti.group
4

Technical data

Rated voltage
Weight
Max. crimping / pressing force
Crimping / pressing time
Storage temperature
Ambient temperature for operation
4.1

Battery

Battery operating voltage
Ambient temperature
Storage temperature
Printed: 29.10.2018 | Doc-Nr: PUB / 5436576 / 000 / 02
Meaning
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• State of charge: 10 % to 25 %
• State of charge: < 10 %
NPR 032 IE-A22
21.6 V
3.0 kg
(6.6 lb)
32 kN
(7,200 lb )
f
≈ 7 s
−20 ℃ ...70 ℃
(−4 ℉ ...158 ℉)
−17 ℃ ...60 ℃
(1 ℉ ...140 ℉)
21.6 V
−10 ℃ ...60 ℃
(14 ℉ ...140 ℉)
−20 ℃ ...40 ℃
(−4 ℉ ...104 ℉)
English 7