3
Description
3.1
Product overview
Crimping / pressing head
@
Piston return switch to open the crimping
;
/ pressing jaws in the event of a fault or
emergency
Casing
=
Servicing and fault indicator (red LED)
%
Battery release button
&
3.2
Intended use
The product described is a cordless electro-hydraulic crimping tool.
It is designed for crimping fittings used to connect composite, copper (Cu) and steel pipes.
▶ Use only Hilti lithiumion batteries of the B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.
3.3
Possible misuse
•
Do not use this hand-held product clamped in a fixed position or as a stationary device.
•
This electro-hydraulic crimping tool may not be exposed to heavy rain or used under water.
3.4
Lithiumion battery status display
The charge state of the Li-ion battery and malfunctions of the product are indicated by the indicator of the
Liion battery. The state of charge of the Liion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED flashes.
6
English
Printed: 29.10.2018 | Doc-Nr: PUB / 5367421 / 000 / 02
Battery
(
Slot on both sides to fasten the Hilti retain-
)
ing leash
White LED to illuminate the working area
+
Control switch
§
Locking pin for opening/closing the tool
/
head
Crimping / pressing jaws
:
Meaning
•
State of charge: 75 % to 100 %
•
State of charge: 50 % to 75 %
•
State of charge: 25 % to 50 %
•
State of charge: 10 % to 25 %
•
State of charge: < 10 %