WeTech WTC1803 User Manual

USER MANUAL

WTC1803

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your Passiv charger. Before using your charger, read this

manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for the charging SEPURA STP8000, STP9000 and SC20 radio units

with original rechargeable batteries.

Made in Germany

Table of Contents

Need help?

Do you have a question about the WTC1803 and is the answer not in the manual?

Page 1 USER MANUAL WTC1803 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your Passiv charger. Before using your charger, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 Under no circumstances should you use water or other liquids. Scope of delivery The following items are included in the scope of delivery: Passiv-Charger WTC1803 Holding bracket for WTC1803 Passive accessory set Start of the sy stem Passive accessory set Connect the strands (1) of the DC cable provided to mains power.
Page 3 Red LED Quick charging active. Battery capacity under Quick charging inactive. Battery capacity over Not used DC socket DC socket for power supply voltage in accordance with the technical data. Schematic drawing WTC1803 © WEMPE Elektronic GmbH...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de Made in Germany...