WeTech DP1-1702USB User Manual

USER MANUAL

DP1-1702USB

Article number: 600230

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your desk programming station (DP). Before using your DP, read

this manual and all warning instructions with care in order to avoid possible danger.

DP1-1702USB

DP1-1702USB with Adapter Plate

This product is suitable for charging and programming SEPURA SC20 radios with an original

rechargeable battery.

With an additional Adapter Plate (Article number 500655) is charging and programming

SEPURA SC21 possible, too.

Made in Germany

Table of Contents

Need help?

Do you have a question about the DP1-1702USB and is the answer not in the manual?

Page 1 DP1-1702USB Article number: 600230 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your desk programming station (DP). Before using your DP, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 The contacts of the product should be cleaned at regular intervals with a dry cloth. Do not use water or other liquids. Please do not use DP1-1702USB to charge SEPURA STP8000 and STP9000. Radio device and DP may be damaged due to a different Pin assignment.
Page 3 Red LED Quick charging active. Battery capacity under Quick charging inactive. Battery capacity over Red LED Electricity supply is given Power Power connection for delivered power cable connection USB B socket Data interface to PC Schematic drawing DP1-1702USB Made in Germany...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de Made in Germany...

600230