WeTech WTC1702 User Manual

USER MANUAL

WTC1702

Article number: 600214

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your Passiv charger. Before using your charger, read this

manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for the charging of SEPURA SC20, STP8000 and STP9000 radio

units with original rechargeable batteries.

Charging of SEPURA SC21 is with an additional adapter plate (article number 500655) in

these car kit possible.

Hint: Not included!

Adapter plate SC21

Table of Contents

Need help?

Do you have a question about the WTC1702 and is the answer not in the manual?

Page 1 WTC1702 Article number: 600214 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your Passiv charger. Before using your charger, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 Under no circumstances should you use water or other liquids. Scope of delivery The following items are included in the scope of delivery: Passiv-Charger WTC1702 Holding bracket for WTC1702 Passive accessory set Start of the sy stem Passive accessory set Connect the strands (1) of the DC cable provided to mains power.
Page 3 Red LED Quick charging active. Battery capacity under Quick charging inactive. Battery capacity over DC socket DC socket for power supply voltage in accordance with the technical data. Schematic drawing WTC1702 © WEMPE Elektronic GmbH...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de Made in Germany...

600214