WeTech PassivPlus WTC623 User Manual

USER MANUAL

WTC623

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your PassivPlus charger. Before using your charger, read this

manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for the charging of MOTOROLA MTP6550, MTP6650 and MTP6750

radio units with MOTOROLA NNTN8023 rechargeable batteries.

Table of Contents

Need help?

Do you have a question about the PassivPlus WTC623 and is the answer not in the manual?

Page 1 USER MANUAL WTC623 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your PassivPlus charger. Before using your charger, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 Safet y ins truc tions Installation and the first start of the system should only be carried out by qualified technicians. When installed in a vehicle, the installation specifications of the vehicle manufacturer apply. Fasten the unit only in the interior of the vehicle. The fastening material included in delivery is recommended for proper installation.
Page 3 Functions The charging bracket is used for quick charging and maintaining charge. The table below provides information about the function of the displays and the connections of the unit. Pos. Designation Status Description Green LED Battery detected. Battery not detected. Contact with the radio unit may not have been established properly.
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de Made in Germany...