WeTech DC676BNC-690 User Manual

USER MANUAL

DC676BNC-690

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your desk charger (DC). Before using your DC, read this manual

and all warning instructions with care in order to avoid possible danger.

This product is suitable for charging MOTOROLA MTP850, MTP830, MTP830S and

MTP830FuG radios with FTN6574, FTN4331 and PMNN4351 rechargeable batteries.

Made in Germany

Table of Contents

Need help?

Do you have a question about the DC676BNC-690 and is the answer not in the manual?

Page 1 USER MANUAL DC676BNC-690 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your desk charger (DC). Before using your DC, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 The ventilation slots must not be covered. Scope of deliver y The following items are included in the scope of delivery: 1x DC676BNC-690 1x Power cable Start of the s ys tem Place the DC at a suitable place. Ensure a safe stand! Connect the delivered power cable to the power connection (B) at the device and a socket.
Page 3 Battery not detected. Contact with the radio unit may not have been established properly. Schematic drawing DC676BNC-690 H pertains to both LED. The upper LED pertains to the upper charging shaft, the lower LED pertains to the lower charging shaft.
Page 4 This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de The first value pertains the 2-in-1 Battery charger, the second value pertains for PassivPlus charger See in footnote 2...