WeTech WTC1704 User Manual

USER MANUAL

WTC1704

Article number: 600211

Thank you for purchasing a WeTech® product. This user manual contains important safety

and operating instructions for your Passiv charger. Before using your charger, read this

manual and all warning instructions with care in order to avoid possible danger.

This product is suitable for the charging of ICOM IC-F1000 radio units with ICOM BP-279

and BP-280 batteries.

Table of Contents

Need help?

Do you have a question about the WTC1704 and is the answer not in the manual?

Page 1 WTC1704 Article number: 600211 Thank you for purchasing a WeTech® product. This user manual contains important safety and operating instructions for your Passiv charger. Before using your charger, read this manual and all warning instructions with care in order to avoid possible danger.
Page 2 Under no circumstances should you use water or other liquids. Scope of delivery The following items are included in the scope of delivery: Passiv-Charger WTC1704 Holding bracket for WTC1704 Passive accessory set Start of the sy stem Passive accessory set Connect the strands (1) of the DC cable provided to mains power.
Page 3 Red LED Quick charging active. Battery capacity under Quick charging inactive. Battery capacity over DC socket DC socket for power supply voltage in accordance with the technical data. Schematic drawing WTC1704 © WEMPE Elektronic GmbH...
Page 4 The correct disposal of this product supports environmental protection and prevents possible damage to the environment and human health. Contact This product was manufactured in Germany by: WEMPE Elektronic GmbH phone: +49 6621 9240-0 Leinenweberstr. 6 fax: +49 6621 9240-44 DE-36251 Bad Hersfeld website: www.wetech.de e-mail: info@wetech.de Made in Germany...

600211