Table of Contents
Advertisement
Additional Free-Flow operations and settings
In addition to the core configuration functions, Free-Flow has a number of additional
settings that you can make.
Mouse... (acceleration) setting
Acceleration
Mouse acceleration allows you to move the mouse pointer quickly across the large areas
of the screen in response to small but sharp shifts in the mouse position. The Configure
> Mouse... option provides settings between 0 and 50, however, a value of 12 to 15 will
give a typical Windows-like default operation.
Mouse parking... setting
Mouse parking allows you to optionally determine where the mouse pointer for each
system should be placed when the focus moves to a different system/video screen. The
Configure > Mouse parking... option displays vertical and horizontal scroll bars. Use
the scroll bars to pinpoint the position that should be used to park the dormant mouse
on each screen.
Switch... settings
Enable (Disable) Free-Flow
This option allows you to switch off the Free-Flow feature within the CCS-PRO switch.
Located within Configure > Switch... menu item, untick the Enable Free-Flow
checkbox and download the configuration the CCS-PRO switch to disable.
Start-up Port
Located within Configure > Switch... menu item (see above image), this option allows
you to determine which port should be enabled whenever the CCS-PRO switch is first
powered on.
Switch Mode
Located within Configure > Switch... menu item (see above image), these check boxes
allow you to determine which peripherals should be switched whenever the channel is
changed by the Free-Flow method. The switching of peripherals via the other methods of
channels selection (e.g. the front panel, hotkeys, mouse buttons, etc.) remain unaffected
by these settings. By default, the Keyboard/Mouse and Audio are selected.
29
Advertisement
Table of Contents
