Configuring Led Monitor Indicators - ADDER CCS-PRO8 User Manual

Configuring LED monitor indicators

When the optional CCS-XB LED monitor indicator kit is used, there are several
configuration options available that allow you to customise behaviour and these are set
using the Free-Flow configuration application.
Note that the LED monitor indicators may be used without Free-Flow.
Adjusting colour and brightness for all indicators
If necessary, you can impose default colour and brightness settings upon all connected
LED monitor indicators. Choose Configure > LEDs... to display the following popup:
To impose a default colour on all connected indicators, choose the required Default
colour and then tick the option Set all LEDs to this colour.
Use the Default brightness option to determine the intensity of all indicators.
Click OK to exit and apply the required settings.
Note: Once default settings have been made you can optionally change any or all indicators
individually as required using the steps outlined below.
Adjusting individual indicators
For each installed video display screen, you have the opportunity to add and configure an
LED monitor indicator.
To adjust details for an individual indicator
1 Double-click on a screen representation (or right click on a screen representation and
then choose Properties) to display the screen popup.
2 Click the LED Set-up tab to display the indicator details:
3 For a newly added screen the LED: entry will show No LED. Click on the drop
down handle and choose the LED indicator that you wish to associate with the
currently selected video display screen:
Each entry within the LED: list relates to one of
the ten output sockets on the CCS-XB module.
Note: It is possible to associate any LED
indicator with more than one video screen.
4 Choose the CCS-XB LED output port that you wish to associate with the currently
selected video screen.
5 Optionally alter the colour, from the Colour: list, that you wish the LED indicator to
display when the associated video screen is selected:
6 Click OK to save and exit.
7 Repeat steps 1 to 6 for each screen that requires an LED monitor indicator.
8 Choose Configure > Send Layout to Switch to update the CCS-PRO switch.
9 The LED monitor indicators may be used without Free-Flow. To disable Free-Flow,
simultaneously press and hold Ctrl and Alt, then press F. This acts as a toggle, so repeat
to re-enable Free-Flow.
Note: Each LED indicator can only
have one colour, so if you associate an
indicator with more than one screen
and then change the colour on a later
screen assignment, it will be changed
for all the screens in the list for that
LED indicator.
28