Table of Contents
Advertisement
Network settings
To display the Network settings page
1
Access the CCS
Manager.
2 On the left side, click the Configuration button.
3 On the left side, click the Network settings option.
The various network settings are as follows:
• Require a username and password to logon - When ticked, the unit will request
a valid username and password before allowing access to the CCS Manager.
• Obtain IP address automatically (DHCP) - When ticked, the unit will derive
its IP address, netmask and gateway settings from the DHCP (Dynamic Host
Configuration Protocol) server on the local network. Additionally, the optional Name
entry entered within the
General Configuration
performing a DHCP search.
• Address, Netmask and Gateway - When the setting above is unticked, these three
fields are used to define the fundamental network settings of the CCS-PRO unit. The
default settings are as follows:
• Address:
192.168.1.22
• Netmask:
255.255.255.0
• Gateway:
192.168.1.1
When the Obtain IP address... option is ticked, these three fields will display the
settings that were defined by the DHCP server.
section can also be used when
19
Advertisement
Table of Contents
