Husqvarna TC 85 2023 Owner's Manual page 108

15 TUNING THE ENGINE
106
–
Clean gear teeth
–
Mount the shift lever on the shift shaft in the required position
and engage gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift procedure.
–
Mount and tighten screw
401951-10
Guideline
Screw, shift
lever
A
of the shift lever and shift shaft.
1
with washers.
M6 14 Nm (10.3 lbf ft)
®
Loctite 243™