Emerson AMS Trex Device Communicator User Manual page 35

User Guide
2.10.9
2.10.10
User Guide
1.800.561.8187
3. Edit the following options as needed.
Option
Auto adjust daylight
savings
Date
Date Format
Time
Time Format
Time Zone
4. Tap OK.
Calibrate the touchscreen
If the touchscreen seems inaccurate, you can recalibrate it.
Procedure
1. Note
If your Trex unit is unresponsive to the touch screen, you can navigate to this menu
with the arrow keys, then initiate the calibration.
Tap Settings or the status bar at the top of the screen.
2. Tap More → Display → Calibrate touch screen.
3. Tap the screen as indicated.
4. Tap OK.
Set the language on Trex
Changing the display language requires the AMS Trex unit to be rebooted. Make sure you
have no outstanding changes before changing the display language.
Procedure
1. Tap the toolbar at the top of the screen.
2. Tap More → Language.
3. Select a language, and tap OK.
The AMS Trex unit reboots and the new language is displayed. Not all applications
support all available languages. The Trex unit does not support entering characters
in non-Latin languages.
www.
AMS Trex Device Communicator overview
Description
Enable or disable the Trex unit from automatically adjusting
the time for daylight saving time.
Enter the date.
Select the format for the date. You can select DD/MM/YYYY
or YYYY/MM/DD.
Enter the time.
Select the 12 hour or 24 hour format.
Select the time zone.
information@itm.com
.com
September 2021
35