Glossary - Emerson AMS Trex Device Communicator User Manual

Table of Contents

Advertisement

User Guide

Glossary

Activation
Ammeter
Burst mode
Commissioned device
Communication module
Data Link Time
Device
Device Communicator communication module
Device Communicator Plus communication module
Device description (DD)
Externally-powered device
Externally-powered loop
User Guide
1.800.561.8187
Activation updates the Trex unit with any needed licenses and enables the full
functionality of the Trex unit. Activation also associates the Trex unit and its attached Trex
modules with a user account/company.
The mA terminals on the Device Communicator Plus communication module that enable
the Trex unit to measure current on a 4-20 mA current loop. The HART + pwr terminals can
also measure current.
A communication mode in a HART transmitter to send data at regular intervals.
A device that has been set up to communicate with a host system. This usually includes
assigning a permanent address to the device.
Some operations on the Trex unit are disabled for commissioned devices because they
could cause process disruption.
A term to refer to either the Device Communicator communication module or the Device
Communicator Plus communication module.
A network-wide time that is periodically distributed by the LAS to synchronize all device
clocks on the bus.
See HART device or FOUNDATION fieldbus device.
A communication module you can attach to the Trex unit. This module has terminals that
enable the Trex unit to communicate with HART and FOUNDATION fieldbus devices.
A communication module you can attach to the Trex unit. This module has terminals that
enable the Trex unit to communicate with HART and FOUNDATION fieldbus devices,
power a HART or FOUNDATION fieldbus device, and measure current on a 4-20 mA
current loop.
A set of instructions written in the HART or FOUNDATION fieldbus Device Description
Language that defines the parameters, commands, and methods that a host application
uses to communicate with a HART or FOUNDATION fieldbus device.
A HART or FOUNDATION fieldbus device that is powered by a power supply or digital
control system. The Trex unit is not powering the device, loop, or fieldbus segment.
www.
information@itm.com
.com
Glossary
September 2021
193

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents