Connecting the Peripherals
Caution
Caution
22 Installing and Configuring the Hardware
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Do NOT power up the VXI card cage and the VXI Pentium
Controller until you make all connections to the peripherals, as
explained in this section.
Use extreme caution when connecting peripheral cables to the
controller. The I/O base board of the VXI Pentium Controller
provides power for peripheral devices through different pins.
Making incorrect connections can damage the board and may
damage the peripheral device being connected.
The VXI Pentium Controller supports several standard, PC-compatible I/O
peripherals, including a keyboard, mouse, and monitor. Before you power
up the controller, you must connect the peripherals as explained in the
following list. Note that you can connect the peripherals in any order.
•
Connect a PS/2-style or compatible keyboard (6-pin, mini-DIN
connector) to the KBRD connector.
•
Connect a PS/2-style or compatible mouse (6-pin, mini-DIN
connector) to the MOUSE connector.
•
Optionally, connect a serial mouse to serial port COM1.
•
Connect a VGA or better monitor (15-pin, D-shell connector) to the
VGA connector.
•
Optionally, connect an HP C2944D CD-ROM drive to the SCSI port.
Chapter 2