Advertisement
■ Sensor Heads (Through-beam)
Item
Model
Optical system
Through-beam
Light source
Visible-light semiconductor laser with a wavelength of 650 nm
(wave length)
EN class 1, FDA class II
Maximum output
0.2 mW max.
Measurement width
1-mm dia.
Measurement
0 to 500 mm
distance
8- µ m dia.
Minimum sensing
object
(opaque)
4 µ m *2
Resolution*1
± 0.2% FS/ ° C
Temperature
characteristic
Incandescent lamp: 10,000 l × max. (on light-receiving side)
Ambient illumination
Operating: 0 to 50 ° C, Storage: − 25 to 70 ° C (with no icing or condensation)
Ambient temperature
Ambient humidity
Operating: 35% to 85% (with no condensation)
Degree of protection
IEC60529, IP40
Connection method
Connector relay (standard cable length: 500 mm)
Weight (packed state)
Approx. 220 g
Cable length
Extendable up to 10 m with special extension cable.
Materials
Case
Polyether imide
Cover
Polycarbonate
Front filter Glass
0.3 N ⋅ m max.
Tightening torque
Accessories
Sensor Head-Amplifier Connection Cable, instruction sheet
Optical axis adjustment seal
*1. This value is obtained by converting the deviation ( ± 3 σ) in the linear output that results when the sensor head is connected to the amplifier unit,
into the measurement width.
*2. For an average count of 64. The value is 5 µ m for an average count of 32.
This is the value that results when a minimum sensing object blocks the light near the center of the 1-mm measurement width.
*3. For an average count of 64. The value is 5 µ m for an average count of 32.
*4. For an average count of 64. The value is 15 µ m for an average count of 32.
ZX-LT001
0.35 mW max.
1- to 2.5-mm dia. 5 mm
500 to 2,000 mm 0 to 500 mm
8- to 50- µ m dia.
0.05-mm dia. (opaque)
(opaque)
4 µ m *3
---
ZX-LT005
ZX-LT010
10 mm
0.1-mm dia. (opaque)
ZX Series (ZX-L)
ZX-LT030
0.2 mW max.
30 mm
0.3-mm dia. (opaque)
12 µ m *4
± 0.3% FS/ ° C
Approx. 450 g
Zinc die-cast
Mounting Bracket
Smart Sensors
3
Advertisement
