Brother DCP-J572DW Online User's Manual page 603

Level 1 Level 2
NFC -
(MFC-J890DW)
Message from Message from
Brother Brother
Status
Web Connect Proxy Settings Proxy
Settings
Network I/F -
(MFC-J890DW)
WLAN Enable -
(DCP-J772DW/
MFC-J690DW)
Network Reset -
[Print Reports]
[Settings] > [All Settings] > [Print Reports]
Level 1
XMIT Verify
(MFC models)
Address Book
(MFC models)
Fax Journal
(MFC models)
User Settings
Network Configuration
WLAN Report
Caller ID History
(MFC models)
(Not available for Taiwan and some
countries)
[Machine Info.]
[Settings] > [All Settings] > [Machine Info.]
Level 1
Serial No.
Firmware Version
Firmware Update
Firmware Auto Check -
Level 3
-
-
-
Connection
Address
Port
User Name
Password
-
-
-
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing
faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print a list of your Network settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information about the last 30
received faxes and telephone calls.
Level 2 Descriptions
- Check your machine's serial number.
Main Version Check your machine's firmware version.
- Update your machine to the latest firmware.
View firmware information on the Home screen.
Level 4 Descriptions
- Turn the NFC function on or off.
- Display messages and notifications from
Brother.
-
- Change the Web connection settings.
-
-
-
-
- Select the network connection type.
- Turn wireless network connection On or
Off.
- Restore all network settings back to the
factory settings.
596