Brother DCP-J572DW Online User's Manual page 199

DCP-J772DW/MFC-J690DW/MFC-J890DW
1. Place your identification card face down near the upper-left corner of the scanner glass.
a
a
d
b
a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. Scannable area
2. Press
[Copy].
3. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the touchscreen.
• Press to display the keyboard on the touchscreen, and then enter the number of copies using the
touchscreen keyboard. Press [OK].
4. Press [Options] > [Page Layout] > [2in1(ID)].
5. Read and confirm the displayed list of settings you have selected. When you have finished changing settings,
press [OK].
6. Press [Mono Start] or [Colour Start].
The machine starts scanning one side of the identification card.
7. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan
the other side.
Related Information
• Copy
c
192