Brother DCP-J572DW Online User's Manual page 369
Hide thumbs
Also See for DCP-J572DW:
- Online user's manual (627 pages) ,
- Reference manual (34 pages) ,
- Product safety manual (21 pages)
Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct
>
Configure Your Wi-Fi Direct Network
Push Method of Wi-Fi Protected Setup
Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-
Fi Protected Setup
>> DCP-J572DW/MFC-J491DW
>> DCP-J772DW/MFC-J690DW/MFC-J890DW
DCP-J572DW/MFC-J491DW
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received.] will appear on the LCD. Press c to connect.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [Group Owner]. Press OK.
d. Select [On]. Press OK.
e. Select [Push Button]. Press OK.
3. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device.] appears. Press c on your Brother
machine. This will start the Wi-Fi Direct setup.
4. If your mobile device connects successfully, the machine displays [Connected]. You have completed the
Wi-Fi Direct network setup.
DCP-J772DW/MFC-J690DW/MFC-J890DW
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1. Press
[Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Group Owner] >
[On].
2. Press [Push Button].
3. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions). When [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on
the machine's LCD, press [OK] on your machine.
This will start the Wi-Fi Direct setup.
If your mobile device connects successfully, the machine displays [Connected]. You have completed the Wi-Fi
Direct network setup.
Related Information
•
Configure Your Wi-Fi Direct Network
™
(WPS)
™
(WPS)
> Configure Your Wi-Fi Direct Network Using the One-
>
Use
362
Advertisement
Table of Contents
