Foppapedretti OPEN i-Size Assembly Instructions Manual page 28

DIAGONAL BELT
LIMITATIONS AND REQUIREMENTS FOR USE OF THE CAR SEAT AND THE
VEHICLE SEAT
IMPORTANT NOTICE
This is an advanced restraint system for children classified as an "i-Size" booster seat.
It is approved under the R129 standard for use in vehicles on seats "compatible with
i-Size systems", as indicated in the car manual by the vehicle manufacturer.
If in doubt, contact the manufacturer of the child restraint system or the retailer.
This restraint system for children is classified for "i-Size & Specific Vehicle" use and is
suitable for installation on the seats in the positions indicated:
WARNING! The following limitations and requirements for use relating to the car seat
and the vehicle seat must be strictly followed, otherwise safety is not guaranteed. The
child must be from 100 to 150 cm tall.
The child seat is approved for 2 different methods of installations:
A. With vehicle's 3-point safety belt
B. With vehicle's 3-point safety belt in combination with smart fix connectors locking
into vehicle's ISOFIX lower anchorages.
It is recommended to use the car seat with ISOFIX connectors if the vehicle is equipped
with ISOFIX anchorage.
• ENGLISH •
USE IN THE VEHICLE
LAP BELT
28
Permitted installation
Unpermitted installation
It is recommended to move the passenger
seat back as far as possible and to adjust
the backrest to the most vertical position
possible.
Installation permitted if the car seat is
equipped with three-point seat belt