Fold The Car Seat To Store In The Boot Of The Vehicle Pag; Removing The Cover Pag; Maintenance And Cleaning Pag - Foppapedretti OPEN i-Size Assembly Instructions Manual

• ENGLISH •
MAINTENANCE AND CLEANING
• The headrest must be positioned so that there is a gap of two fingers between it and
the child's shoulders (4E2).
• The lap belt must lie as low as possible on your child's pelvis on both sides (4E3).
• No parts of belt should be twisted.
5. FOLD THE CAR SEAT TO STORE IN THE BOOT OF THE VEHICLE
Raise the headrest to the maximum height (5A).
Pull the strap on the back of the backrest vertically and keeping it pulled (5B1), fold the
backrest forward (5B2).
A clack will indicate the release of the backrest allowing it to be folded back onto the
seat (5C).
6. REMOVING THE COVER
Removing the cover
Unclasp the press studs and remove the cover from the car seat, see (6A-6F).
Replacing the cover
To replace the cover, follow the instructions above in reverse order.
Before use, make sure that the cover is correctly positioned on the car seat.
CLEANING
The lining can be removed and washed in a washing machine with a mild detergent,
using the delicate fabric cycle (30°C).
Follow the washing instructions shown on the label.
The colours may fade if washed at temperatures above 30°C.
Never spin dry or tumble dry (as the fabric could become detached from the padding).
The plastic parts may be cleaned with water and soap. Do not use harsh detergents
(such as solvents).
IMPORTANT: The lining is a fundamental component for your child's safety. Never use
the car seat without the lining, nor replace it with other products which have not been
approved, so as to avoid endangering the child's safety or compromising the proper
functioning of the device.
It is recommended to use only the original covers, as these components are of
fundamental importance for the correct functioning of the device.
Do not expose the lining to sunlight for prolonged periods; when the car seat is not in
use, cover it or place it in the boot.
32