Kaon KS0694 Fitting Instructions

Side molle panels for toyota prado 120, lexus gx 470

Download this manual

F I T T I N G I N S T R U C T I O N S F O R

Side Molle Panels

S K U

KS0694

Included contents

Q T Y

C O M P O N E N T

Side Molle Panel (LHS & RHS)

Black Self Tapping Screw

Black M5 x 16 x 1.0 DIN Washer

For further information contact KAON on 07 3180 1470 or info@kaon.com.au

C O M P A T I B I L I T Y

Toyota Prado 120, Lexus GX 470

Time

30 minutes / Half a beer

Need help?

Do you have a question about the KS0694 and is the answer not in the manual?

Page 1 Q T Y C O M P O N E N T Side Molle Panel (LHS & RHS) Black Self Tapping Screw Black M5 x 16 x 1.0 DIN Washer For further information contact KAON on 07 3180 1470 or info@kaon.com.au...
Page 2 Molle as well. fitting guide. Are you installing other Are you installing other Are you installing other KAON Storage Products? KAON Storage Products? KAON Storage Products? With the foundation in place, it’s time to mount any other accessories,...
Page 3 The ‘K’ on each panel should be oriented at the front of Whether you’re starting from a the vehicle. factory rear, or with existing KAON Now is the easiest time to attach accessories, we need to start from any accessories such as pouches, a blank slate.
Page 4 Finishing the Install Apply gentle pressure to the molle panel so it sits flush against the interior trim. Ensure the spacing around the Molle Panels is even and correct. Use a 3mm bit to carefully drill the three lower mount holes. Depending on preference, you can drill without removing the panel.
Page 5: Bolt Torque
For further information call 07 3180 1470 or email info@kaon.com.au Disclaimer: The products sold by KAON should not be modified, and are for use only on the vehicles specifically stated. KAON will not be liable for any damages arising out of the use or misuse of it’s products. It is the customers responsibility to ensure the products are safely...