Rs-485 Communication Control; Using Coaxial Communications - Samsung SCO-2080R User Manual

Connection

RS-485 communication control

Connecting to RS-485 Control Cable
Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG
TECHWIN System Controller or DVR.
(1) Connection to a PC.
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485
CONTROL CABLE
(2) Connection to a DVR or System Controller.
Connect the RS-485 cable to the connection ports of the DVR or System Controller.
485 Control Board Connection Port
(+) CONNECTION TERMINAL
(-) CONNECTION TERMINAL
* RS-485 Communication establishment initial value
Item
Camera ID BAUD RATE
Initial value
1 9600
Notes
• W hen making a control system to control the camera, please use to the protocol
SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYELL).
• W hen you connecting to RS-485 CONTROL TERMINAL, please peel off the outer
skin inside the RS-485 CONTROL TERMINAL.
• I n case of SCC-101 connection, change communication mode to
configuration menu. (For more information, refer to SCC-101 manual.)
』
COLOR CCD CAMERA
CONTROL CABLE SPEC
WHITE (TRX+) RS-485+
BLUE (TRX-) RS-485-
RS-485 Control Port
WHITE (TRX+)
BLUE (TRX-)
UART MODE RET PKT
8-NONE-1 ENABLE
8-E-1 at Communication
『 』 『
14
User Guide

Using Coaxial Communications

• Coaxial Communications System
• OSD Control method
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
DVD
– Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
Notes
• I f the camera is controlled through coaxial communication, please use a video
amp intended for coaxial communications. Regular video amps do not transfer
coaxial signals.
COLOR CCD CAMERA
DVR
: BNC
•
• ---- : RS-485
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
15
User Guide