Samsung SCO-2081R Series User Manual

Samsung SCO-2081R Series User Manual

High resolution weatherproof ir camera
Hide thumbs Also See for SCO-2081R Series:


High Resolution
IR Camera
User Manual


Table of Contents

Subscribe to Our Youtube Channel

Summary of Contents for Samsung SCO-2081R Series

  • Page 1 High Resolution Weatherproof IR Camera User Manual SCO-2081R...
  • Page 2: User Manual

    Samsung Techwin. Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.
  • Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we’ll introduce our model description. ■ SCO-2081R SERIES • NTSC MODEL • PAL MODEL SCO-2081RN SCO-2081RP • POWER SOURCE SCO-2081RN, SCO-20801RP : AC24V, DC12V...
  • Page 4: Safety Information

    Safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 5 If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (samsung is not liable for problems caused by unauthorized modifications or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
  • Page 6: Fcc Statement

    Safety information fCC sTATemeNT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation.
  • Page 7: Important Safety Instructions

    15.This product is intended to be supplied by a Listed Power Supply Unit marked "Class2" and rated from 24 Vac (50 or 60) Hz or 12 Vdc, min.0.5A . Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products.The Eco mark represents...
  • Page 8: Table Of Contents

    Contents INTRODUCTION Features What’s included Component names and Functions Adjust the lens's zoom and focus CONNECTION Connecting to Monitor Connecting to Power Function jack Using coaxial communications SETUP Menu Confi gration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifi cations Dimension 8_ Contents...
  • Page 9: Introduction

    Outdoor Visibility range 50M The IR LEDs of the SCO-2081R automatically illuminates viewing area in the extreme darkness allowing the camera a long-range visibility of up to 50 meters. IP66 Approved/Dust and Rain Resistant With dust and rain resistant design, the camera can be installed outside under building eaves or places that are exposed to the dust and rain.
  • Page 10: What's Included

    - PAL : English, French, German, Spanish, Italian, Chinese, Russian, Polish, Czech, Romanian, Serbian, Swedish, Danish, Turkish, Portuguese WHAT’S INCLUDED Check if the following items are included in the product package. Sunshield Adaptor (1EA) SCO-2081R Sunshield High Resolution weatherproof IR Camera...
  • Page 11: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS Front ❶ ➍ ➎ ❻ ➐ Camera Sunshield Sunshield adaptor : Fixing the sunshield onto the camera. Focus lever : Set focus of lens by turn the focus lever. Zoom lever : Set zoom magnification of lens by turn the zoom lever. Front cover Function Setup Switch : Display the menu on the screen and move the cursor to four directions to confirm...
  • Page 12 Introduction Back ❿ Function jack : It contains RS-485 communication jack, ALARM OUT, EXT _ D/N input and GND. Video output jack : Video signals are output through this port. Connect this port to the Video IN port of a monitor. Power input terminal : Connect the power as specified for each model here.
  • Page 13: Adjust The Lens's Zoom And Focus

    ADJUST THE LENS'S ZOOM AND FOCUS Remove the sunshield from the camera. Remove the front cover from the camera by turning it counterclockwise. Unlock the Zoom or Focus lever before adjusting the lens. Adjust the zoom & focus by moving the lever counterclockwise for (NEAR & TELE) and clockwise for (WIDE &...
  • Page 14: Connecting To Monitor

    Connection CONNECTING TO MONITOR Please connect the Video output jack located on the back of the camera to the monitor. Monitor CCD Camera The connection method varies depending on the type of monitor and accessories. Please refer to the user's manual for each instrument. Please turn off the power when connecting.
  • Page 15: Function Jack

    BLUE (ALARM OUT) GRAY (EXT _ D/N IN) BLACK (GND) GREEN (485-) & YELLOW (485+) CONNECTING TO RS-485 CONTROL CAB LE Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG TECHWIN System Controller or DVR. English_15...
  • Page 16: Connection

    8-N-1 ENABLE  When making a control system to control the camera, please use to the protocol SAMSUNG-T, SAMSUNG-E, PELCO-D , PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD.  When you connecting to RS-485 CONTROL TERMINAL, please peel off the outer skin inside the RS-485 CONTROL TERMINAL.
  • Page 17 ALARM NETWORK BACKUP ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU DVD RECORDER OPEN/CLOSE RETURN : BNC • • ---- : RS-485 - Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxiliary video amp.
  • Page 18: Setup

  • Page 19 MAIN SETUP 1.LENS Select the function using Change the status 2.EXPOSURE the Function Setup switch. using the Function Setup switch. DEFOG WHITE BAL BACKLIGHT SSNR3 DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE Select a desired function using the Function Setup switch. Place the cursor over a desired item. Set up a selected item by using the Function Setup switch.
  • Page 20 Setup EXPOSURE 1. When the SETUP menu screen is displayed, select EXPOSURE by using the Function Setup switch so that the arrow indicates 'EXPOSURE'. Select a desired mode using the Function EXPOSURE SETUP Setup switch. 1.BRIGHTNESS IIIIIIIII IIIIIIII  BRIGHTNESS : Adjusts the video brightness. 2.SHUTTER ...
  • Page 21 White Balance operation may become unstable. BACKLIGHT The SCO-2081R is designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by adopting a function of the proprietary W6 DSP chip.
  • Page 22 Setup 2. Select a desired mode using the Function Setup switch depending on the camera purpose. UseR blC : Enables a user to directly  BLC SETUP select a desired area from a ▶ 1.LEVEL MIDDLE picture, and to view the area 2.TOP IIIII ...
  • Page 23 DAY/ NIGHT You can display pictures in color or black and white. 1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and Down buttons so that the arrow indicates ‘DAY/NIGHT’. 2. Select a desired mode using the Left and Right buttons according to the picture display you want.
  • Page 24 Setup SPECIAL Setup 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function switch so that the arrow indicates ‘SPECIAL’. SPECIAL 2. Select a desir ed mode using the Function Setup 1.IMAGE ADJ switch. 2.CAM TITLE OF F PRIVACY OF F...
  • Page 25 : You can select the menu language according to your requirements. lANGUAGe RUTURN : Select this to save the menu settings and return to the IMAGE ADJ SPECIAL menu.  CAm TITle : If you enter a title, the title will appear on the monitor. 1 If the SPECIAL menu scr een is displayed, use the Function Setup switch so that the arrow indicates ‘CAM TITLE’.
  • Page 26 Setup  pRIVACy : Mask an area you want to hide on the screen. 1 When the SPECIAL menu screen is displ- PRIVACY AREA SETUP ayed, press the Function Setup switch so ▶ 1.AREA AREA1 that the arrow indicates ‘PRIVACY’. 2.MODE Set up the mode using the Function Setup 3.MASK COLOR...
  • Page 27 When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.   COaX : COAX option is set to "On" will specify the use of coaxial communication.  SSDR(samsung super dynamic Range) SSDR illuminates darker areas of an image while SSDR SETUP retaining the same light level for brighter areas to ▶...
  • Page 28 DISP ID : Display camera ID on top left corner of the screen. PROTOCOL : You can select one of various protocols. SAMSUNG-T, SAMSUNG-E, PELCO-D , PELCO-P, BOSCH, HONEYWELL, VICON, PANASONIC, GE, AD.
  • Page 29: Troubleshooting

    Troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. SOLUTION PROBLEM Check that the power cord and line connection between the Nothing appears on the screen.
  • Page 30: Specifi Cations

    Specifications SPECIFICATIONS SCO-2081RN SCO-2081RP Video Imaging Device 1/3” Super HAD CCD (Double Scan) 1020(H) x 508(V) 1020(H) x 596(V) Total Pixels 976(H) x 494(V) 976(H) x 582(V) Effective Pixels Scanning System 2:1 Interlace Synchronization Internal / Line Lock Frequency H : 15.734KHz V:59.94Hz H: 15.625KHz V: 50.00Hz Horizontal Resolution 700 TV lines ( ER Mode ), B/W:700 TV Line...
  • Page 31 Communication Coaxial Control ( SPC-300 Compatible ), RS-485 Coax : Pelco-C ( Coaxitron ) Protocol RS-485: Samsung-T, Samsung-E, Pelco-D, Pelco-P, Panasonic, Bosch, Honeywell, Vicon , AD , GE Environmental Operating Temperature -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH...
  • Page 32: Dimension

    Specifications DIMENSION Unit: mm(Inches) 280.2 163.1 146.8 114.2 32_ Specifi cations...
  • Page 33 MEMO...
  • Page 34 MEMO...
  • Page 35 MEMO...
  • Page 36 SAMSUNG TECHWIN EUROPE LTD. SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Park Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300, FAX : +44-1932-45-5325

This manual is also suitable for:


Table of Contents