Troubleshooting
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
• Nothing appears on the screen.
Check that the power cord and line connection between the camera and monitor are
▶
fixed properly.
Check that you have properly connected UTP cable or BNC cable to the camera.
▶
• The image on the screen is dim.
Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶
▶
Set the monitor to proper condition.
If the camera is exposed to too strong light, change the camera position.
▶
• The image on the screen is dark.
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75Ω / Hi-z properly.
▶
• The camera is not working properly, and the surface of the camera is hot.
Check that you have properly connected the camera to an appropriate power source.
▶
• The SENS-UP function does not work.
Check that AGC of EXPOSURE SETUP menu is 'OFF'.
▶
▶
Check that SHUTTER of EXPOSURE SETUP menu is 'A.FLK' or 'MANUAL'.
• The Motion Detection function does not work.
▶
Check that MOTION DET of SPECIAL SETUP menu is 'OFF'.
• Color is not correct.
▶
Check the setting of WHITE BAL SETUP menu.
• The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
• When coaxial communication is not available:
▶
Make sure that the camera and monitor are installed within the recommended distance.
Use the video amplifier equivalent to coaxitron if the recommended installation distance is
▶
exceeded.
• IR-LED isn't lighted.
▶
Isn't DAYNIGHT function setting up the color mode?
Please change the AUTO or B/W mode.
▶
• The camera is not waterproof.
Please check the Front Cover and Main Body by the following Guide Label.
▶
COLOR CCD CAMERA
32
User Guide
SCO-2080RN
ELECTRICAL
Input Voltage
DC 12V ± 10% / AC 24V ± 10%
Power Consumption
Max 6.8W / 6.5W (IR-LED ON)
VIDEO
Imaging Device
1/3 inch, Diagonal 6mm Super HAD CCD
Total Pixels
811(H) x 508(V)
Effective Pixels
768(H) x 494(V)
Scanning System
2:1 Interlace
Synchronization
Internal /Line-Lock
Frequency
H : 15.734KHz V:59.94Hz
Horizontal Resolution
COLOR : 600TV line, B/W : 700TV line
LED ON : 0Lux
Min. Illumination
LED OFF : 0.15Lux (Color, F1.2), 0.0003Lux (Color,SENS-UP x512)
Visibility distanse(IR LED)
50m (32EA)
S/N (Y Signal)
52dB (Weight On, AGC Off)
Video Output
CVBS : 1.0Vp-p, 75Ω composite
LENS
Zoom Ratio
3.6x (Manual)
Focus Length
2.8 ~ 10.0mm (F1.2)
Angular Field of View
H : 94.4°(Wide) ~ 28°(Tele) / V : 69.2°(Wide) ~ 21°(Tele)
OPERATIONAL
Electronic Shutter Speed
1/60 ~ 1/120k sec
On Screen Display
NTSC : 7 Languages, PAL : 15 Languages
SSDR
On / Off (Level adjustable)
Backlight Compensation
BLC / HLC / OFF
Day & Night
COLOR / B/W / AUTO (ICR)
Gain Control
Low / High / Off
White Balance
ATW / Outdoor / Indoor / Manual / AWC (1,700°K ~ 11,000°K)
SENS-UP (frame Integration)
Auto / Off (Selectable x2 ~ x512)
Motion Detection
On / Off (8 Programmable zones)
Privacy Masking
On / Off (12 Programmable zones)
3D Noise Filter (SSNRIII)
On / Off (Level adjustable)
Digital Zoom
On / Off (x1 ~ x16)
Digital Image Stabilization(DIS)
On / Off
Camera Title
On / Off (Displayed 15 Characters)
Sharpness
On / Off (Level adjustable)
Flip / Mirror
On / Off
Communication
Coaxial, RS-485
Coaxial(Pelco), RS-485(SAMSUNG-T, SAMSUNG-E, PELCO-P, PELCO-D, VICON,
Protocol
PANASONIC, BOSCH, HONEYWELL)
ENVIRONMENTAL
Operating Temperature / Humidity
-10°C ~ +55°C / Less than 90% RH
MECHANICAL
Water Resistance
IP66
Dimension
Ø77mm(W) x 216mm(H) (BRACKET ANGLE 90°), 284mm (BRACKET ANGLE 180°)
Weight
1Kg
※ The specification for this product may change without prior notice for product improvement.
COLOR CCD CAMERA
Specifications
SCO-2080RP
795(H) x 596(V)
752(H) x 582(V)
H: 15.625KHz V: 50.00Hz
1/50 ~ 1/120k sec
33
User Guide