Download Table of Contents Print this page
Samsung SIR-4160 User Manual

Samsung SIR-4160 User Manual

High resolution day & night ir camera sir-4160
Hide thumbs Also See for SIR-4160:


High Resolution Day & Night IR Camera SIR-4160
User Guide
Before installing and operating this product,
please read this manual thoroughly.


Table of Contents

Summary of Contents for Samsung SIR-4160

  • Page 1 High Resolution Day & Night IR Camera SIR-4160 User Guide Before installing and operating this product, please read this manual thoroughly. ENGLISH...
  • Page 2 Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model description. n SIR-4160 SERIES • NTSC MODEL • PAL MODEL SIR-4160N SIR-4160P n MODEL DESCRIPTION • SIR-4160 X _ The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3: Table Of Contents

    Front ……………………………………………………………………………… 9… This function prevents the saturation of the image by the IR illuminators at short distance. Back … … …………………………………………………………………………… 10 By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera Adjust to lens • ………………………………………………………… 11 produces clear picture quality with a horizontal IP66 Approved/Dust and Rain resolution of 600 TV lines for color and a horizontal Ajust to Lens’s ZOOM and Focus … … …………………………………………… 11 Resistant resolution of 700TV lines for BW mode.
  • Page 4: Warnings & Cautions

    Precautions Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin's will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive. Do not install under extreme Do not install in high humidity Warnings & Cautions environment. temperature conditions. This information is provided to ensure your safety and to prevent any losses, financial or otherwise. Please read it carefully and use the product accordingly. * F or product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as an aerial ladder while providing after-sales service shall be at your expense.
  • Page 5: Components And Accessories

    ❶ ❹ Do not drop the camera or Never keep the camera face to subject it to physical shock. strong light directly. ❻ ➐ ➑ SIR-4160 Sunshield L-type hexagon wrenches (3.0mm) ❶ Sunshield Adaptor (1EA) Tapping Screw (3EA) User’s Manual ❻ May cause a product malfunction. May damage the CCD.
  • Page 6: Back

    Overview Adjust to Lens Notes Adjust the lens's zoom and focus • W hen you adjust to the ZOOM & FOCUS of the lens, Please remove the front cover 1. Remove the sunshield from the camera. from the camera, by turning the cover counterclockwise. 2. Remove the front cover from the camera by turning it counterclockwise. • T o adjust the zoom & focus loosen the individual levers before tightening them 3.
  • Page 7: Connection

    Connection Connecting to Monitor Connecting to Power The recommended adaptor specification for SIR-4160N/P is DC 12V/4A, AC 24V/2A Please connect the video output terminal located on the back of the camera to the monitor. over. Please check the standard power requirement before connecting the power. ( Recommend AC 24A/2A over adaptor for a long-distance.) Monitor CCD Camera...
  • Page 8: Rs-485 Communication Control

    Connection RS-485 communication control Using Coaxial Communications • Coaxial Communications System Connecting to RS-485 Control Cable • OSD Control method CAMERA CONTROLLER CONTROL CABLE SPEC MENU/ENTER OSD KEY WHITE (TRX+) RS-485+ UP KEY JOYSTICK UP BLCAK (TRX-) RS-485- DOWN DOWN KEY JOYSTICK DOWN LEFT LEFT KEY...
  • Page 9: Operating Your Camera

    Operating Your Camera Menu Configuration MAIN SETUP Select the function using 1.LENS Change the status using MAIN SETUP the Function Setup switch. the Function Setup switch. 2.EXPOSURE LENS 3.WHITE BAL ●DC 4.SSDR ●BRIGHTNESS… ●SHUTTER… ●AGC……… 5.BACKLIGHT EXPOSURE ●SENS-UP ●RETURN 6.SSNR3 7.DAY/NIGHT AUTO ●ATW… ●OUTDOOR… ●INDOOR… 8.SPECIAL WHITE BAL ●MANUAL… ●AWC→SET 9.EXIT SAVE...
  • Page 10 Operating Your Camera Notes - FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust • When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled. the lens focus, and then deactivate the settings mode. AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but Notes the higher the noise.
  • Page 11 If the environment changes, readjust it. BACKLIGHT Notes Unlike conventional cameras, the SIR-4160 is designed to deliver a distinctive subject and • W hite Balance may not work properly under the following conditions. In this case background at the same time, even when the subject is backlight, by using the features of select the AWC mode.
  • Page 12 Operating Your Camera (Black, Red, Blue, Cyan, Magenta) SSNR3 - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced This function reduces the background noise in a low luminance environment. OFF : Not being used 1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function Setup switch so that the arrow indicates ‘SSNR3’.
  • Page 13 Operating Your Camera - BURST MODE : You can turn on or off the burst signal on DAY/NIGHT B/W mode. AUTO SETUP ▶ 1.BURST MODE - DURATION : You can select brightness of illumination 2.COLOR→B/W You can display pictures in color or black and white. DURATION FAST about changing the day/night mode.
  • Page 14: Exit

    Operating Your Camera IMAGE ADJ. : SPECIAL 1) When the SETUP menu screen is displayed, select ‘IMAGE ADJ’ by using the Function 1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Function Setup Setup switch so that the arrow indicates ’IMAGE ADJ‘. switch so that the arrow indicates ‘SPECIAL’.
  • Page 15 Operating Your Camera CAM TITLE : If you enter a title, the title will appear on the monitor. SYNC : In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize the output phase 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the of multiple cameras using the power arrow indicates ‘CAM TITLE’.
  • Page 16 Operating Your Camera PRIVACY : Mask an area you want to hide on the screen. COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device. PRIVACY AREA SETUP When the SPECIAL menu screen is displayed, press the Function Setup switch 1.AREA AREA1...
  • Page 17: Troubleshooting

    Troubleshooting Specifications SIR-4160N SIR-4160P If there are problems in operation, please refer to the items below. If the ELECTRICAL problem persists, please contact the agent you purchased this product from. Input Voltage DC 12V ± 10% / AC 24V ± 10% Power Consumption Max 6.8W / 6.5W (IR-LED ON) •...
  • Page 18: Dimension

    DECLARATION OF CONFORMITY Dimension Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Ø77 86mm Equipment Type/Environment CCTV Camera 274.7mm Model Name SIR-4160P Beginning Serial NO. C10S7010007 Year of Manufacture 2009.07.03 Conformance to EN 50081-1 : 1992 EMC-Directive 89/336 EEC and 92/31/EEC EN 50130-4 : 1996 Ø79.8 We, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s). Manufacturer SAMSUNG TECHWIN CO., LTD Legal Representative in Europe Signature Signature Full Name BONJENG GU Full Name Position QUALITY CONTROL MANAGER Position...
  • Page 19 SALES NETWORK SAMSUNG TECHWIN CO., LTD. • 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si Gyeonggi-do, Korea, 462-703 TEL : +82-31-740-8151~8 FAX : +82-31-740-8145 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE CO., LTD. • • 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS...

Table of Contents