Rs-485 Communication Control; Using Coaxial Communications - Samsung SIR-4260V User Manual

Connection

RS-485 communication control

Connecting to RS-485 Control Cable
Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG
TECHWIN System Controller or DVR.
(1) Connection to a PC.
Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.
EX) SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485
CONTROL CABLE
(2) Connection to a DVR or System Controller.
Connect the RS-485 cable to the connection ports of the DVR or System Controller.
485 Control Board Connection Port
(+) CONNECTION TERMINAL
(-) CONNECTION TERMINAL
* RS-485 Communication establishment initial value
Item Camera ID BAUD RATE
Initial value
1 9600
Notes
• When making a control system to control the camera, please use to the STW(SPD)
PROTOCOL or PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYWELL, SEC
PROTOCOL.
• When you connecting to RS-485 control cable, please peel off the outer skin inside the
RS-485 control cable.
• In case of SCC-101 connection, change communication mode to『
『Communication configuration』menu. (For more information, refer to SCC-101 manual.)
14
COLOR DOME CAMERA
CONTROL CABLE SPEC
WHITE (TRX+) RS-485+
BLCAK (TRX-) RS-485-
RS-485 Control Port
WHITE (TRX+)
BLACK (TRX-)
UART MODE RET PKT
8-NONE-1 ENABLE
8-E-1
』at
User's Manual

Using Coaxial Communications

• C oaxial Communications System
• O SD Control method
CAMERA DVR CONTROLLER
SET IRIS OPEN IRIS OPEN
UP JOYSTICK UP JOYSTICK UP
DOWN JOYSTICK DOWN JOYSTICK DOWN
LEFT JOYSTICK LEFT JOYSTICK LEFT
RIGHT JOYSTICK RIGHT JOYSTICK RIGHT
DVD
– Video Cable
T he camera's video output port is connected to the monitor with a BNC coaxial cable,
shown below : If the distance between the camera and the monitor exceeds the
recommended maximum, please use an auxiliary video amp.
Notes
• If the camera is controlled through coaxial communication, please use a video amp intended
for coaxial communications. Regular video amps do not transfer coaxial signals.
COLOR DOME CAMERA
DVR
Distance Recommended Cable Specification
300m 3C2V(RG-59/U)
450m 5C2V(RG-6/U)
600m 7C2V(RG-11/U)
15
User's Manual