Table of Contents
Advertisement
4 Familiarising yourself with your appliance
4.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
2
1
Display with setting ring
You can use the digital setting ring to set the
appliance via the display.
You will see the current setting values, options
or relevant information.
→ "Display", Page 7
2
You can use the buttons to directly set various
functions.
→ "Buttons", Page 7
4.2 Buttons
You can use the buttons to directly select various func-
tions.
Button
Function
Switch the appliance on or off.
Open the "Operating modes" menu.
Start or pause operation.
Display for Home Connect. The field
has no further function.
When the symbol lights up, the appli-
ance is connected.
Open the control panel to remove the
water tank.
→ "Filling the water tank", Page 17
1
2
Familiarising yourself with your appliance en
4.3 Display
The display is divided into different areas.
Digital setting ring
You can use the digital setting ring on the display to
change the setting values.
When you reach the minimum or maximum value avail-
able, this value remains on the display. If required, use
the setting ring to turn the value back again.
Finely tuned setting values
To fine-tune the setting values, e.g. to set a time to the
precise minute, press and hold the corresponding area
in the setting ring for around 1 - 2 seconds. The finely
tined setting values are shown in dots.
Status indicator
Status information is shown at the top of the display.
Symbol
Meaning
Timer is activated.
Childproof lock is activated.
→ "Childproof lock", Page 24
WiFi signal strength for Home Connect.
The more lines of the symbol are filled,
the better the signal.
If the symbol is struck through
is no WiFi signal.
If there is an "x" at the symbol
is no connection to the Home Connect
server.
→ "Home Connect ", Page 26
Remote start with Home Connect is ac-
tivated.
→ "Home Connect ", Page 26
Remote diagnostics with Home Con-
nect for maintenance is activated.
→ "Home Connect ", Page 26
Access to different functions.
Settings area
The settings area is in the centre of the display.
You can see current options and settings that have
already been made in the settings area.
You can see other setting options to the left and right
of the settings area, outside of the setting ring.
The menu and other setting options are arranged hori-
zontally. Selection lists for functions are vertically ar-
ranged. Swipe over the display to scroll in the settings
area. To select a function, press the function on the dis-
play.
→ "Setting the operating mode", Page 14
Possible symbols in the settings area
Symbol
Meaning
Go back one setting.
Reset the setting value.
, there
, there
7
Advertisement
Table of Contents
