Table of Contents
Advertisement
Buttons
The sensors are located under the individual buttons. They
must not be pressed too firmly. Just touch the corresponding
symbol.
Symbol
Button function
!
Selects the type of heating and temperature
`
Selects automatic programmes
p
Selects the cleaning system.
This button is not assigned. The cleaning sys-
tem can only be selected when the self-cleaning
ceiling and side parts have been retrofitted and
connected, and the cleaning system has been
activated in the basic settings.
X
Moves one row down
Y
Moves one row up
f
Press and hold = selects the memory
Press briefly = starts the memory
c
Setting rapid heating
0
Opens and closes the time-setting options
B
Switches the oven light on and off
°
Press briefly = calls up the temperature
Press and hold = opens and closes the Basic
settings menu
D
Activates/deactivates the childproof lock
%
Switches the oven on and off
n
Press briefly = starts/pauses operation
Press and hold = cancels operation
Rotary selector
The rotary selector is used to alter the default values and set
values. The brackets in the control panel show which value you
can adjust.
The rotary selector is retractable. Press on the rotary selector to
pop it in or out.
Display
The display is divided into different areas.
'LVSOD\
Left area = time-setting options
■
When you open the Time-setting options menu, the symbols
for the time-setting options are displayed here. An outside
arrow on the left points to the operating mode which has
been selected.
Centre area = settings area
■
1st row = type of heating display
2nd row = temperature display
3rd row = clock display
X
You can use the
and
from one row to the other. Brackets are displayed around the
row you are currently in. You can use the rotary selector to
change the value in brackets.
Right area = display
■
Symbols for the various functions are displayed here, e.g. for
6
Y
navigation buttons to switch
the childproof lock or rapid heating, etc. if they have been
set.
Temperature indicator
The temperature indicator bars show the heating phases or
residual heat in the cooking compartment.
Heating indicator
The heating indicator displays the rising temperature in the
cooking compartment. If all bars are filled, the optimum time for
placing the dish in the oven has been reached.
The bars do not appear when settings are made for grilling and
cleaning.
°
You can use the
button to check the current heating
temperature while the oven is heating up. Due to thermal
inertia, the temperature displayed may differ slightly from the
actual temperature in the cooking compartment.
Residual heat
The temperature indicator shows the residual heat in the
cooking compartment when the appliance is switched off. If all
the bars are filled, the temperature in the cooking compartment
is approximately 300 °C. Once the temperature has dropped to
approximately 60 °C, the display goes out.
Cooking compartment
The oven light is located in the cooking compartment. A cooling
fan protects the oven from overheating.
Oven light
During operation, the oven light in the cooking compartment is
on. When temperatures up to 60 °C are selected, the light
remains switched off. This enables precise temperature
regulation.
The oven light switches on when you open the oven door.
B
You can use the
Cooling fan
The cooling fan switches on and off as required. The hot air
escapes above the door. Caution: do not cover the ventilation
slots. Otherwise the oven will overheat.
So that the cooking compartment cools down more quickly
after operation, the cooling fan continues to run for a certain
period afterwards.
Z
button to switch the light on and off.
Advertisement
Table of Contents
