Siemens Sinteso S-LINE FDOOT241-9 Manual page 7

Installation
Easy, time-saving, and completely reliable mounting
● Detector base FDB221 for surface-mounted and recess-mounted supply lines
● Detector base FDB222 for flush mounting, only for recess-mounted supply lines
● Extra-long mounting slits allow existing drill holes from other systems to be reused.
● A large opening in the detector base makes it easy to feed the cables through
● Screwless connection terminals (spring clip principle)
● Detector line can be connected without any tools. The wire can be inserted easily by
hand.
● The detector can be mounted in the base easily by hand or using a detector exchanger
● The alarm indicator (AI) is centered in the detector, which means there is no need to
align the detector
1
5
1 Mounting slit
2 Screwless connection terminals
3 Detector base
You will find more information in document 007775.
Disposal
Building Technologies
Fire Safety
2
The device is considered an electronic device for disposal in accordance
with the European Guidelines and may not be disposed of as domestic
garbage.
● Dispose of the device through channels provided for this purpose.
● Comply with all local and currently applicable laws and regulations.
● Dispose of empty batteries in designated collection points.
3
4
4 Alarm indicator
5 Opening for cable entry
7
007005_ad_en_--
2019-01-22