Siemens Sinteso S-LINE FDOOT241-9 Manual page 5

Accessories
You will find more information about detector bases and accessories in document 007775.
Addressable detector base FDB221 / FDB221-AA
Flat, addressable detector base FDB222
Base attachment FDB291
Base attachment humid FDB293
Building Technologies
Fire Safety
Function:
● Detector base with stilts for fire detectors with addressable signal processing
● 'Orange' connection terminals, 0.2...1.5 mm
● FDB221-AA also contains micro terminal DBZ1190-AA
Use:
● For recess-mounted cable entry
● For surface-mounted cable entry up to a cable diameter of 6 mm
Function:
● Flat detector base for fire detectors with addressable signal processing
● 'Orange' connection terminals, 0.2...1.5 mm
Use:
● For flush mounting; only for recess-mounted cable entry
Function:
● For routing surface-mounted cables larger than Ø 6 mm
● Detector base is secured with a snap fastener
● For achieving a higher protection category
● For mounting in wet or humid environments
● Required when using detector heating unit FDBH291
● Required when using protective cage DBZ1194 or EMC-protective cage
FDBZ294
● Mounted between detector base and ceiling
● Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.
conductor cross-section
2
conductor cross-section
2
007005_ad_en_--
5
2019-01-22