Table of Contents
Advertisement
4. Connect the keyboard cable and backlight cable to the connectors on the touchpad.
5. Install the mylar adhesive sheet over the keyboard.
Next steps
1. Install the
I/O daughter
2. Install the
system
board.
3. Install the
display
assembly.
4. Install the battery.
5. Install the speakers.
6. Install the
WWAN
card.
7. Install the
solid-state
8. Install the
base
cover.
9. Install the
SIM
card.
10. Install the
microSD
card.
11. Follow the procedure in
Palmrest assembly
Removing the palmrest assembly
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
SIM card
4. Remove the
base
cover.
5. Remove the
solid-state
6. Remove the
WWAN
card.
7. Remove the speakers.
8. Remove the battery.
9. Remove the
display
assembly.
10. Remove the
system
board.
11. Remove the
I/O daughter
12. Remove the
power
button.
13. Remove the keyboard.
About this task
The following images indicate the location of the palmrest and provide a visual representation of the removal procedure.
board.
drive.
After working inside your
before working inside your
card.
tray.
drive.
board.
computer.
computer.
Removing and installing components
61
Advertisement
Table of Contents
