About this task
Steps
1. Align and place the smart card reader on the palmrest assembly.
2. Replace the two screws (M2x2) to secure the smart card reader to the palmrest assembly.
3. Connect the smart card reader cable to the connector on the I/O-daughter board and close the latch.
4. Connect the touchpad FPC to the connector on the system board and close the latch.
Next steps
1. Install the battery.
2. Install the speakers.
3. Install the
base
cover.
4. Install the
SIM card
tray.
5. Install the
microSD
card.
6. Follow the procedure in
46
Removing and installing components
After working inside your
computer.