System Management - Dell Latitude 9520 2-in-1 Service Manual

Table 13. Update Recovery (continued)
Options

System Management

This section provides System Management settings.
Table 14. System Management
Options
Service Tag
Service Tag
Asset Tag
Asset Tag
AC Behaviour
Wake on AC
Wake on LAN
Wake on LAN
Auto On Time
Auto On Time
Intel AMT Capability
Enable Intel AMT capability
Description
● Off
● 1
● 2 (selected by default)
● 3
Description
This field provides the unique Service Tag of the computer.
This field provides the asset tag which is a unique and up
to 64-character identification that can be set by the IT
administrator.
This field contains a toggle switch which allows the user to
enable or disable the feature where the system boots when
charger is detected (OFF by default).
This field allows the user to select if and how the system
should boot when connected to LAN. The options here are as
follows:
● Disabled - The system will not boot with any special LAN
signals (selected by default).
● LAN only - Allows the system to be powered on by a
special LAN signal from a network computer.
● LAN with PXE Boot - Allows the system to wake-up from
S4 or S5 state and boot to PXE.
This field allows the user to set defined days/time when the
sytem can automatically power on. The options here are as
follows:
● Disabled (selected by default)
● Everyday
● Weekdays
● Select Days
This section allows the user to control AMT options on the
system:
● Disabled
● Enabled
● Restrict MEBx Access - Selected by default
System setup 77