Scheppach THM850 Manual page 47

In addition to the safety regulations in the operating instructions, you
have to meet the applicable regulations that apply for the operation of
the machine in your country.
Keep the operating instructions package with the machine at all times
and store it in a plastic cover to protect it from dirt and moisture. Read
the instruction manual each time before operating the machine and
carefully follow its information. The machine can only be operated by
persons who were instructed concerning the operation of the machine
and who are informed about the associated dangers. The minimum age
requirement must be complied with.
In addition to the safety instructions contained in this manual and the
specific country regulations the generally accepted technical rules must
be observed for the operation of woodworking machines.
We cannot accept any liability for damage or accidents which arise due
to a failure to follow these instructions and the safety instructions.
2. Layout (Fig. 1-19)
1. On/Off switch
2. Overload switch
3. Switching pins
4. Chip extractor
5. Parallel stop
6. Star grip nut M8
7. Planing knife cover
8. Star grip nut M6
9. Clamping screw
10. Crank handle
11. Setting screw for chip depth
12. Feed table
13. Planing knife cover cpl.
14. Allen wrench
15. Ripped belt
16. Push stick
17. Locking bolt
GB | 47
www.scheppach.com