Grundig GCI-K1607B Owner's Manual page 32

UPnP Setting :
- Enable UPnP:
When UPnP is enabled, whenever the IP Camera is presented to LAN, the icon of the connected IP Cameras will
appear in My Network Places to allow for direct access as shown below.
NOTE: To enable this function, please make sure the UPnP component is installed on your computer. Please
refer to chapter 17. Install UPnP Components for UPnP component installation procedure.
- Enable UPnP port forwarding:
When UPnP port forwarding is enabled, the IP Camera is allowed to open the web server port on the router
automatically.
NOTE: To enable this function, please make sure that your router supports UPnP and is activated.
- Friendly name:
Set the name of the IP Camera for identification.
30 English