Bluetooth Setup; Bluetooth Device Pairing Instructions; Switching Audio Source: From Am/Fm, Cd To Bluetooth Source - usa-spec BT45-FORD2 Product Manual

BLUETOOTH SETUP

Bluetooth Device Pairing Instructions

1. Turn your vehicle's ignition ON and make sure the radio is
turned on
2. Press the "AUX" button until the radio switches to SAT1
mode.
3. The radio will display "BT45 #####-####"
4. Enable the Bluetooth function on your device (phone)
5. Scan/search for available device from your phone. It may
take up to 30 seconds for your phone to locate the BT45
6. Select BT45-FORD from the list of available devices your
phone has detected.
7. Allow the pairing process to take place
8. Once pairing is complete you will hear the "CONNECTED"
voice prompt from your vehicles' audio system and the radio
will briefly display the name of your phone, i.e. USA SPEC
TEST PHONE.
Switching Audio Source: from AM/FM, CD to
Bluetooth Source
1. Once the BT45 is connected,SAT1 audio sources will
become the Bluetooth audio source. SAT2 & SAT3 will
remain as factory Satellite radio source.
2. Press the "AUX" button to cycle through the audio source
until you reach SAT1: BT45 Bluetooth audio source.
9