Table of Contents
Advertisement
INSTALLATION
Installation Instructions
•
We recommend that the BT45 be installed by a qualified
professional since all installation will require the removal of
some parts of the vehicle such as the dashboard, backseat,
etc.
Set the dip switches on
the interface module
1-ON, 2-ON, 3-ON,
4-OFF
Locate the factory SAT
radio receiver. Reference
p. 3-5 for receiver
locations.
Follow Diagram A on p.7
for cable connections
Install the BT45 interface
module in an easily
accessible location
Install the microphone
See p.8 for
recommended locations
(Optional)
Install cables for the
3.5mm AUX port and
the USB Charging port
Pair your Bluetooth
device (phone)
See p.9 for instructions
Learn about media
streaming, hands-free
phone calls, and AUX input
on p. 10-13
Make sure you have
completed all of the above
steps and have made
a couple of test calls before
putting your car
back together
Please see p. 14
for troubleshooting Q&As
& how to contact our
tech support team for
additional help
6
Advertisement
Table of Contents
