Diagram A: Cable Connection - usa-spec BT45-FORD2 Product Manual

Diagram A: Cable Connection

• The below representations of the radio and cables are
generalized depictions and are not to scale.
Step 1:
Locate the factory SAT radio
receiver and unplug the main
12-pin cable from the
receiver.
Step 2:
Plug the 12-pin male
terminal of the BT-FORDx
cable into the 12-pin port
on SAT receiver.
Step 3:
Take the 12-pin cable
from Step 1 and plug it
into the female terminal
of the BT-FORDx cable.
7
12-pin factory cable
12-pin male terminal
BT-FORDx cable
12-pin factory cable
Factory SAT radio receiver
12-pin female port
Factory SAT radio receiver
12-pin female port
12-pin female
terminal
from Step 1