Dip Switch Settings - usa-spec BT45-FORD2 Product Manual

Model
MKx
MKz
Navigator
Milan
(1) Vehicles without SAT/XM (Satellite radio) receiver please use
the BT45-FORD1 package
(2) For photos of SAT receiver locations please see under the
"DETAILS" tab of the following linked page. https://www.usaspec.
com/p-319-bt45-ford2.aspx

DIP SWITCH SETTINGS

• Set the dip switches located on the interface module to:
1-ON, 2-ON, 3-ON,
Dip switch down position = ON
5
Radio Type /
Year
Radio Button
Lincoln
07 - 08 All radios
07 - 08 All radios
Non navigation
radio only
2009
with AUX/TEXT
07 - 09 All radios
Mercury
06 - 08 All radios
Non navigation
radio only
09
with AUX/TEXT
4-OFF
bottom & side bolster
button
bottom & side bolster
button
SAT Radio Receiver
Location
Passenger side:
behind the rear-seat
side bolster: need
to remove rear seat
In the center console
Passenger side:
behind the rear-seat
side bolster: need
to remove rear seat
(1)(2)