Advertisement
DIP SWITCH SETTING FOR LEXUS RADIOS
(Please read notes)
Model
Year
Make
02 - 03
ES 300/330/350/400H
04 - 10
GS 300/350/430/450H
05 - 09
04 - 06
GX 470
07 - 09
01 - 05
IS 250/300/350
06 - 09
LS 430
01 - 06
LS 460
07 - 09
LX 470
02 - 08
LX 570
2009
00 - 03
RX 300/330/350/400H
04 - 09
NOTE (1):The default settings may conflict with this radio. Use the
BT35-TOY DIP Switch Setting Chart to emulate different modes
(See chart below). Do not use SAT setting if there is an XM
tuner in the vehicle.
NOTE (2): 00-03 RX300 require CAS-TLC* adaptor cable. Vehicles must
have external CD changer in the glove-box. Disconnect the CD
changer and connect the CAS-TLC* cable and BT35-TOY in the
glove-box.
NOTE (3): 01-03 Lexus requires adaptor cable CAS-LEX*.
NOTE (4): Connect BT35-TOY at the ECU for the following vehicles with
Rear Seat Entertainment,
Lexus GX470/RX330 06 & older,
The ECU
is in passenger side rear quarter panel and
an 18 pin CAS-NIS_EXT cable is needed.
*CAS-TLC, CAS-LEX, CAS-NIS_EXT cables must be
purchased separately
BT35-TOY DIP Switch Setting for LEXUS
DIP switch
1
2
3
N/A
OFF
OFF
N/A
OFF
ON
N/A
OFF
ON
N/A
ON
ON
DIP Switch
NOTE
Radios
#2
#3
#4
(1)(3)
All Radios
OFF
ON
OFF
(1)
All Radios
OFF
OFF
OFF
(1)
All Radios
OFF
OFF
OFF
(1)(4)
All Radios
OFF
ON
OFF
(1)
All Radios
OFF
OFF
OFF
(1)(3)
All Radios
OFF
ON
OFF
(1)
All Radios
OFF
OFF
OFF
(1) (3)
All Radios
OFF
ON
OFF
(1)
All Radios
OFF
OFF
OFF
(1) (3)
All Radios
OFF
ON
OFF
(1)
All Radios
OFF
OFF
OFF
(1)(2)
All Radios
OFF
ON
OFF
(1)(4)
All Radios
OFF
OFF
OFF
Radio Button to
Emulated
4
OFF
CDC1
OFF
MD
ON
CDC2
ON
SAT
5
Device Compatibility
Most Bluetooth devices (such as iPhone 3G/3GS/4/4S, iPod Touch 3rd/4th
generations, and Android phones) are compatible with the BT35. However,
USA SPEC does not guarantee that all Bluetooth devices are compatible. For a
Radio
current list of compatible devices, please refer to our website www.usaspec.com
button to
CD/DISC
CD/DISC
Pairing the Bluetooth Device
CD/DISC
CD/DISC
CD/DISC
CD/DISC
Steps to Pair Your Bluetooth Device
CD/DISC
CD/DISC
Step 1: After your BT35 has been properly installed into your vehicle,
CD/DISC
CD/DISC
turn on the ignition and the radio.
CD/DISC
Step 2: Select the CD or SAT button on your radio (this will depend on what
CD/DISC
CD/DISC
DIP switch setting the BT35 is on). This will put the radio in
Bluetooth mode and you should see either Figure 1 or Figure 2. If
you have a text button on your radio, you may have to push the text
button a few times to get to this screen.
Step 3: Make sure your device's Bluetooth setting is turned "on" on your
device and select "search for new devices". (Refer to your
device's owner's manual). BT35 should show as one of the options.
Step 4: Select the BT35 to pair it with your device. If prompted to enter a
code (some devices may not require you to do so), enter "0000".
Pairing may take up to 20 sec. When you are connected, you will
hear the voice prompt "Connected".
Once paired, the BT35 will automatically recognize and connect your Bluetooth
device whenever you turn on your ignition.
Additional Pairing Information
Ÿ Some devices may require additional steps while pairing. Refer to your
device's owner's manual.
Ÿ The BT35 can be paired with up to 8 devices, but will only connect to 1
device at a time.
Press
Ÿ On some vehicles, the BT35 will automatically turn on your radio when you
CD/DISC
CD/DISC
start the ignition in order to connect with your device.
CD/DISC
AM/SAT
Figure 1
6
Figure 2
Advertisement
