LIMITED WARRANTY Thank you for choosing a USA SPEC product. LTI Enterprises Inc., is committed to providing high quality defect-free products. All USA SPEC products are tested before leaving the factory and warranted against defects in materials and workmanship for a TABLE OF CONTENTS period of one year to the original owner.
My radio does not show Caller: ID Not all radios support text display. Thank you for purchasing USA SPEC's Bluetooth Refer to your car’s owner’s manual. integration interface. This manual describes the The voice prompt does not work Make sure you are in Bluetooth mode and push the SCAN button.
CAS-TA. CAS-TA Volume Controls 6. Connect the CAS-TY35 to the CAS-TA. BT35-TOY You can control the volume of your music and phone calls with the 7. Connect the CAS-TY35 cable to the controls on your radio and/or Bluetooth device.
Most radios that are equipped with a TEXT button, will allow you to see the phone number of the incoming call. Press the TEXT button to show the NOTE (1):The default setting may conflict with this radio. Use the BT35-TOY incoming caller.
NOTE (3): 01-03 Lexus requires adaptor cable CAS-LEX*. Figure 1 Figure 2 NOTE (4): Connect BT35-TOY at the ECU for the following vehicles with Step 3: Make sure your device’s Bluetooth setting is turned “on” on your Rear Seat Entertainment, device and select “search for new devices”.