Introduction; Purpose Of This Documentation; Document History; Purpose - Siemens SIPROCESS GA700 Compact Operating Instructions

Introduction

1.1

Purpose of this documentation

These instructions are a brief summary of important features, functions and safety information,
and contain all information required for safe use of the device. Read the instructions carefully
prior to installation and commissioning. In order to use the device correctly, first review its
principle of operation.
The instructions are aimed at persons who install and commission the device.
To realize optimum performance from the device, read the complete operating instructions.
See also
Ex pz safety equipment (Page 115)
1.2

Document history

The following table shows major changes in the documentation compared to the previous
edition.
Edition
10/2014
05/2015
05/2018
11/2019
01/2022
05/2023
1.3

Purpose

The device is designed for the concentration analysis of gases in gas mixtures. Depending on the
installed analyzer module, different gases can be examined.
Use the device only for measuring/analysis of gas concentrations in gas mixtures according to
the information in section "Technical data (Page 87)".
SIPROCESS GA700 rack and wall mounted devices
Compact Operating Instructions, 06/2023, A5E35134047-AB
Remark
First edition
Expansion commissioning. Correction of the internal document links
Expansion with new Ex analyzer modules:
• ULTRAMAT 7 and CALOMAT 7
• OXYMAT 7 and ULTRAMAT 7 in high-temperature version
Expansion and updating of the document
OXYMAT 7 and ULTRAMAT 7 in high-temperature version
Updating the document
General update of the document
Expansion and updating of the document
Merging with SIPROCESS GA700 Quick Start
Adding content for PROFIBUS, CSA certificate, MiniPurge
1
7