atd models ATD007 Instruction Manual page 6

16. Apply a bead of glue across the tops of the
walls. Then detach the roof and position it on
top of the building.
We recommend using ATD low-tac masking
i
tape to assist on this step whilst the glue
cures.
18. Apply a bead of glue across the top of the
chimeny stack and then position the capping
stone face up, as per the illustration below.
You have now completed the Textile Workshop. We hope you enjoyed and
successfully built the kit! To view our other card kits, more products and find your
We'd love to see photos of your finished models. Please send them to
enquiries@atdmodels.co.uk for a chance to be featured on our social media pages.
local stockist, visit www.atdmodels.co.uk
© Copyright ATD Models | All Rights Reserved
17. Detach the capping stones and place them
face down on your work surface. Glue
the smaller component, ensuring that it is
centre aligned.